The Pango 2500 is a 2.5W RGB laser with analogue modulation. Analogue modulation gives you the possibility to adjust the power of the laser beam (dimming). Enabling you to scan into the public or use advanced projection zones in your laser software.
The laser can be controlled over ILDA and DMX or run stand-alone in auto or sound activated mode. There are many preset patterns available to pick from.
- Guaranteed 2W output
- Analogue RGB colour modulation
- 40K high speed optical scanner system
- X- and Y-Size inverter
- DMX and Stand-alone mode
- 12 DMX channels
- Master/slave function
- Sound activated with adjustable sensitivity
- Auto mode with adjustable speed
- Pre programmed shows
- DMX in/output via 3-pin XLR
- Control panel with LED display
- Powerconnector input
Brand BeamZ Pro DMX channels 12 DMX connector 3-pin XLR ILDA Connector DB25 Laser Red 600mW @ 637nm Laser Green 400mW @ 532nm Laser Blue 1500mW @ 447nm Scanner system 40kpps @ 8° Maximum scanner angle 60 degrees Guaranteed output 2000mW Maximum output 2500mW Power consumption 150W Power supply 100-240VAC 50/60Hz Dimensions (L x W x H) 280 x 225 x 208mm Weight 9.3
- Ask a question
You have a question about this product? Fill in this form, we'll answer your question as soon as possible.